Door Curtain Rods
FREE DOOR CURTAIN RODS WITH EACH CURTAIN PURCHASED, Sash Rods or Spring Rods only. We Discount The Other Rods When Purchased Along With Your Curtain.
Door Curtain and French Door Curtain Rods are another fine product we sell at French Door Curtain Company. All our rods are of the finest quality and are the most sturdy rods available on the market. We searched high and low to make sure our door curtain rods would be the very best for our customers!
INSIDE MOUNT RODS
Spring-Rods: Also called Tension-Rods and Spring Tension-Rods. These curtain rods are the easiest to install and will have your curtains up in less than a minute. They don't require any screws, nails, or mounting hardware. They hold themselves up by way of a spring on the inside that 'pushes' them outward very much like the common shower curtain rods do. They mount on the inside of your window sill or molding/trim. You need 1/2 inch of flat space on the inside of your window sill or molding/trim in order for them to hold into place. Since they mount in front of your window glass, the curtain length in this method will be the exact same length of your window itself. They are white/off-white and have rubber ends to prevent them from scrathing your molding. With this method the curtains will ONLY cover the glass itself NOT the molding/trim.
For Windows Less Than 18" Wide, We Send The Tension Type Rods (pictured above) Which Uses a Set Screw To Adjust The Width.
For Door Windows 18" and Wider, We Send The Round Type Rods (not pictured) That You Simply Twist To Enlarge The Width. These Also Have Rubber Ends And Have a Spring Inside. No Set Screw is Needed.
Either Type Are FREE With Each Curtain Purchased. (2 rods, one for the top and one for the bottom)
OUTSIDE MOUNT RODS
Door Curtain Sash-Rods: These decorative curtain rods are as big around as a pencil and are white with either brass ends,brackets,and screws or white with silver ends, brackets, and screws. They mount flush to the door or wall 2 to 3 inches above your window and 2 to 3 inches below your window (with mounting hardware included). Thus the curtain length should be 4-6 inches longer (total) in length than the length of your window. With this method the curtains will cover the window, the molding, and the trim. Also with these rods, you can easily pull the rod pocket of the curtain over the brass ends and the hardware so you see nothing but your curtains.
Door Curtain Flat Sash Rods: These sturdy rods are 3/8" by 7/8" in diameter. They are the most heavy duty rods available for door curtains and are strong enough to hold the heaviest of french door curtain panels without bending even the slightest in the middle. They mount flush to the door or wall 2 to 3 inches above your window and 2 to 3 inches below your window (with mounting hardware included). Thus the curtain length should be 4-6 inches longer (total) in length than the length of your window. With this method the curtains will cover the window, the molding, and the trim. Also with these rods, you can easily pull the rod pocket of the curtain over the brass ends and the hardware so you see nothing but your curtains. (These are not an option for our Free Rods Per Curtain Purchase, but if you order these along with a curtain we will automatically credit your card back $3 per curtain and only send these rods)
Door Curtain Magnetic-Rods: These SKOTZ decorative rods are easily mounted without any hardware since they hold themselves in place with magnets. They come in White, Ivory, Brass finish, Antique Brass finish, or Brushed Nickel finish and protrude out about an inch and a half from the door or wall. These rods can be mounted level with your window but more commonly are placed above and below your window. Of course the area around your window needs to be metal for the magnets to cling to. However you may glue these to any surface if you desire.
For Questions, Measuring Assistance, or To Place an Order, Please Call 24 Hours a day: 1-877-831-3300